No account needed. This session stays in this browser tab; sign in for timed tests, bookmarks and saved performance.
Question 1 · Electrical Engineering (SSC JE) · Control Systems A closed-loop control system is one in which
Choose your answer for question 1 A. there is no controller B. the output has no effect on the control action C. the output is fed back to influence the control action D. the input is always zeroAnswer and explanation Correct answer: C
Feedback lets the system compare the output with the desired value and correct errors.
Question 2 · Electrical Engineering (SSC JE) · Control Systems The transfer function of a linear system is the ratio of
Choose your answer for question 2 A. the input to the output in the time domain B. the Laplace transform of the output to that of the input with zero initial conditions C. the steady state output to the transient output D. the Fourier transform of the input to the outputAnswer and explanation Correct answer: B
G(s) = C(s)/R(s), valid for linear time-invariant systems.
Question 3 · Electrical Engineering (SSC JE) · Control Systems The type of the system with open-loop transfer function G(s) = 10 / [s(s + 2)] is
Choose your answer for question 3 A. 2 B. 0 C. 3 D. 1Answer and explanation Correct answer: D
The type is the number of poles at the origin, here one.
Question 4 · Electrical Engineering (SSC JE) · Control Systems A linear time-invariant system is stable if all the poles of its transfer function lie in
Choose your answer for question 4 A. the right half of the s-plane B. the origin C. the left half of the s-plane D. the imaginary axis onlyAnswer and explanation Correct answer: C
Poles in the left half give decaying exponentials. A pole in the right half gives a growing response.
Question 5 · Electrical Engineering (SSC JE) · Control Systems A second order system with a damping ratio of 0.5 is
Choose your answer for question 5 A. undamped B. overdamped C. critically damped D. underdampedAnswer and explanation Correct answer: D
For 0 < ζ < 1 the response oscillates with a decaying amplitude.
Question 6 · Electrical Engineering (SSC JE) · Control Systems The integral action in a PID controller mainly
Choose your answer for question 6 A. eliminates the steady state error B. increases the steady state error C. reduces the noise D. increases the speed of response onlyAnswer and explanation Correct answer: A
The integral term keeps building up the control output as long as an error persists.
Question 7 · Electrical Engineering (SSC JE) · Control Systems A second order system has the characteristic equation s² + 4s + 16 = 0. The damping ratio is
Choose your answer for question 7 A. 1 B. 0.25 C. 0.5 D. 2Answer and explanation Correct answer: C
ωn² = 16, so ωn = 4. 2ζωn = 4, so ζ = 4/(2 × 4) = 0.5.
Question 8 · Electrical Engineering (SSC JE) · Control Systems The percentage peak overshoot of a standard second order system with ζ = 0.5 is about
Choose your answer for question 8 A. 37 percent B. 4.3 percent C. 16.3 percent D. 50 percentAnswer and explanation Correct answer: C
Mp = exp(−πζ / √(1 − ζ²)) = exp(−1.814) = 0.163.
Question 9 · Electrical Engineering (SSC JE) · Control Systems For a unity feedback type-1 system, the steady state error for a unit step input is
Choose your answer for question 9 A. zero B. 1 C. 1/Kv D. infiniteAnswer and explanation Correct answer: A
A type-1 system has an integrator, so it follows a step input exactly. The error for a ramp is 1/Kv.
Question 10 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 2s² + 3s + 6 = 0. The system is
Choose your answer for question 10 A. stable B. overdamped C. unstable D. marginally stableAnswer and explanation Correct answer: D
The Routh array has a zero row at s¹: (2 × 3 − 6)/2 = 0. The roots are −2 and ±j√3, so there are poles on the imaginary axis.
Question 11 · Electrical Engineering (SSC JE) · Control Systems A positive phase margin of a closed loop system indicates that the system is
Choose your answer for question 11 A. unstable B. marginally stable C. overdamped D. stableAnswer and explanation Correct answer: D
Positive gain and phase margins in a minimum phase system mean the closed loop is stable.
Question 12 · Electrical Engineering (SSC JE) · Control Systems The Nyquist stability criterion is based on the number of encirclements of
Choose your answer for question 12 A. the point +1 + j0 by the closed-loop response B. the origin by the closed-loop response C. the imaginary axis by the root locus D. the point −1 + j0 by the open-loop frequency responseAnswer and explanation Correct answer: D
The criterion relates the encirclements of the critical point to the right half plane poles of the closed loop.
Question 13 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 3s² + 10s + 20 = 0. By the Routh criterion, the system is
Choose your answer for question 13 A. stable B. unstable C. critically damped D. marginally stableAnswer and explanation Correct answer: A
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 3 × 10 − 20 = 10, so the system is stable.
Question 14 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 7s² + 8s + 25 = 0. By the Routh criterion, the system is
Choose your answer for question 14 A. critically damped B. marginally stable C. stable D. unstableAnswer and explanation Correct answer: C
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 7 × 8 − 25 = 31, so the system is stable.
Question 15 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 5s² + 4s + 29 = 0. By the Routh criterion, the system is
Choose your answer for question 15 A. unstable B. marginally stable C. stable D. critically dampedAnswer and explanation Correct answer: A
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 5 × 4 − 29 = -9, so the system is unstable.
Question 16 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 6s² + 2s + 23 = 0. By the Routh criterion, the system is
Choose your answer for question 16 A. unstable B. stable C. marginally stable D. critically dampedAnswer and explanation Correct answer: A
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 6 × 2 − 23 = -11, so the system is unstable.
Question 17 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 9s² + 12s + 27 = 0. By the Routh criterion, the system is
Choose your answer for question 17 A. stable B. unstable C. marginally stable D. critically dampedAnswer and explanation Correct answer: A
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 9 × 12 − 27 = 81, so the system is stable.
Question 18 · Electrical Engineering (SSC JE) · Control Systems A system has the characteristic equation s³ + 8s² + 11s + 19 = 0. By the Routh criterion, the system is
Choose your answer for question 18 A. critically damped B. marginally stable C. stable D. unstableAnswer and explanation Correct answer: C
For s³ + a s² + b s + c, the Routh test uses ab − c. Here 8 × 11 − 19 = 69, so the system is stable.
Question 19 · Electrical Engineering (SSC JE) · Control Systems A second order system has ζ = 0.4 and ωn = 2 rad/s. The 2 percent settling time (ts = 4/ζωn) is
Choose your answer for question 19 A. 2 s B. 25 s C. 5 s D. 15 sAnswer and explanation Correct answer: C
ts = 4/(ζωn) = 4/(0.4 × 2) = 5 s.
Question 20 · Electrical Engineering (SSC JE) · Control Systems A type-1 unity feedback system has a velocity error constant Kv = 189. The steady state error for a unit ramp input is
Choose your answer for question 20 A. 189 B. 0.995 C. 0.00526 D. 0.00529Answer and explanation Correct answer: D
ess (ramp) = 1/Kv = 1/189 = 0.00529.